product focus sion sleeve is welded to the lower bushing. A 12-in. diameter, 1.75-in. wall pin inserts into the leg to provide a storm safe condition at all times except when removed to raise the platforms. MR-6H SE Marine Riser Connection Vetco Gray's new marine riser system, the MR-6H SE, brings improvements to the current industry offerings in both safety and efficiency. The design of the MR-6H SE combines field-proven technology of the H-4 subsea wellhead connector and the dog-style marine riser (MR). To make the fully-automated connection of the MR-6H SE, hydraulic units on the spider engage a cam ring on the box which actuates six dogs into the profile in the pin. This creates a full pre-loaded connection with an efficient and effective load path. The MR-6H SE connection is fully automated. This takes people out of a potentially hazardous situation. The pin is lowered into the box and guided into place with an internal guide pin. Then the spider does the rest, automatically making up the connection. It takes less than a minute to make/break the MR-6H SE connection. A string of MR-6H SE can be run in about half the time of a flanged riser system. SeaBooster PowerTrac Cone Crusher Scale Mill Concept Kvaerner Well Service dedicated a significant amount of engineering effort to solving removing wellbore scale build-up. The result: the Cone Crusher scale mill tool. The Cone Crusher assembly, run in conjunction with the PowerTrac Advance (PTA) wireline tractor, is set up with a special rotation adapter, mill gear and shock absorber for weight-on-bit control. Aker Kvaerner's SeaBooster increases production rate of oil wells requiring local pressure support by injecting sea water. The system allows the water injection system to be located close to the actual wells, avoiding installation of flow lines and topside water injection pump at a host platform. In cases of limited topside platform space and in deep waters, this is a cost-effective and energy-saving option. The SeaBooster system has the capability of handling high flow rates, up to approximately 151,000 bbl/day, and generating high differential pressures, up to approximately 4,100 psi, for both fracture and continuous pressure support modes of operation. It includes a filtration module for subsea solids removal prior to injection into the reservoir to avoid plugging the formation, as well as provisions for chemical injection to prevent souring the reservoir. 56 MTR to the previous casing strip linEXX solid expandable casing - run below the FORMlock hanger with preexpanded OD of 8 in. and expanded to 8.625 in. ID with 8.500 in. ID drift RNX retrievable guide shoe installed at the bottom of the linEXX string to guide the liner in the hole; and catEXX hydraulic, top-down expansion system. DYNAenergetic's No Debris Gun System (NDG) Perforating jobs traditionally leave a lot of unwanted debris in the well. The interior of the perforation guns and the cases of the shaped charges are fragmented during the shot. To overcome this situation DYNAenergetics GmbH & Co KG has developed a new type of perforating gun system. This patent pending No-Debris Gun System (NDG) Solid Expandable Monobore Liner Extension System The linEXX Solid Expandable Monobore Liner Extension System optimizes casing configurations for drilling deeper or isolating trouble zones without reducing hole size. The system consists of: RC9 series recess casing shoe installed with the previous 9 5/8 in. (or 9 7/8 in.) casing strip to enable the liner to be anchored on the bottom of the parent casing and the expanded into the shoe with no ID size restriction below the parent casing FORMlock expandable liner hanger/packer - locates in the RC9 casing shoe and ties the linEXX liner May 2007
You don't have Macromedia Flash Player installed.
This content requires the Macromedia Flash Player.